Full-Res JPEG (148.9 kB)
Full-Res TIFF (5.634 MB)
Specially designed Cassini orbits place Earth and Cassini on opposite sides of Saturn’s rings, a geometry known as occultation. Cassini conducted the first radio occultation observation of Saturn’s rings on May 3, 2005.
Three simultaneous radio signals at wavelengths of 0.94, 3.6, and 13 centimeters (Ka-, X-, and S-bands) were sent from Cassini through the rings to Earth. The observed change of each signal as Cassini moved behind the rings provided a profile of the distribution of ring material and an optical depth profile.
This simulated image was constructed from the measured optical depth profiles of the Cassini Division and ring A. It depicts the observed structure at about 10 kilometers (6 miles) in resolution. The image shows the same ring A region depicted in a similar image (PIA07874), using a different color scheme to enhance the view of a remarkable array of over 40 wavy features called “density waves” uncovered in the May 3 radio occultation throughout ring A.
Color is used to represent information about ring particle sizes based on the measured effects of the three radio signals. Shades of red indicate regions where there is a lack of particles less than 5 centimeters (about 2 inches) in diameter. Green and blue shades indicate regions where there are particles of sizes smaller than 5 centimeters (2 inches) and 1 centimeter (less than one third of an inch), respectively.
Note the gradual increase in shades of green towards the outer edge of ring A. It indicates gradual increase in the abundance of 5-centimeter (2-inch) and smaller particles. Note also the blue shades in the vicinity of the Keeler gap (the narrow dark band near the edge of ring A). They indicate increased abundance of even smaller particles of diameter less than a centimeter. Frequent collisions between large ring particles in this dynamically active region likely fragment the larger particles into more numerous smaller ones.
The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA’s Science Mission Directorate, Washington, D.C. The Cassini orbiter was designed, developed and assembled at JPL. The radio science team is based at JPL.
Image Credit: NASA/JPL