Swatch of Wright Brothers Flyer 1 Attached to Mars Helicopter

• Click the image above for a larger view
• Full-Res JPEG (8256 x 5504) (4.1 MB)
• Full-Res TIFF (8256 x 5504) (84.4 MB)

Caption:

NASA's Ingenuity Mars Helicopter carries a small swatch of muslin material from the lower-left wing of the Wright Brothers Flyer 1. Located on the underside of the helicopter's solar panel (the dark rectangle), the swatch is attached with dark orange polymide tape to a cable extending from the panel, and then further secured in place with white polyester cord used to bind cables together. A gray dot of epoxy at the intersection of the three wraps of cord prevents the lacing from loosening as the rotor blades (upper pair seen at bottom of image) rotate at up to 2,400 rpm. The entire process, from enclosing the material in the plastic to affixing it onto the helicopter took, approximately 30 minutes.

The swatch of material from the Wright brothers' first airplane was obtained from the Carillon Historical Park, in Dayton, Ohio — home to the Wright Brothers National Museum. The image was taken in a clean room at NASA's Jet Propulsion Laboratory in Southern California on January 15, 2020.

Background Info:

NASA's Ingenuity Mars Helicopter technology demonstration is supported by NASA's Science Mission Directorate, the NASA Aeronautics Research Mission Directorate, and the NASA Space Technology Mission Directorate. The agency's Jet Propulsion Laboratory, which is managed for NASA by Caltech in Pasadena, California, built and manages operations for Ingenuity and the Perseverance Mars rover.

For more about Perseverance: mars.nasa.gov/mars2020/ .

For more about Ingenuity: go.nasa.gov/ingenuity .

Cataloging Keywords: