PIA09580: Sinuous Ridges Near Aeolis Mensae


Sinuous Ridges Near Aeolis Mensae

Caption:

Click here for larger version of PIA09580
Click on image for larger version

This HiRISE image ( PSP_002279_1735 ) covers part of a fan-shaped deposit of material in the Aeolis Mensae region of Mars.

The dominant surface texture is a series of parallel linear ridges. In addition, there are several sinuous, flat-topped ridges. The sinuous ridges do not follow the trend of the linear ridges, and various intersecting relations are observed.

The southernmost sinuous features in this image are partially buried by linear ridge material, while in the northern part of the image they appear to stand above it. This could indicate that the linear unit has been more eroded in the north than the south, but may also be due to a more complex geological history in which different sinuous ridges formed at different times. In the northeast part of the image one sinuous ridge appears superposed on another, supporting this hypothesis.

The linear ridges may be yardangs. Yardangs form when material is eroded by wind, producing elongated features aligned with the prevailing wind. Many of the ridges expose layers and appear to have broken into boulders. Layering indicates multiple episodes or pulses of deposition, while the occurrence of boulders shows that the material has been consolidated to some degree.

The sinuous ridges could be former stream channels outcropping in inverted relief, where a formerly low-lying feature is now relatively high-standing. This occurs when the stream channel is more resistant to erosion that the surroundings, either due to cementation by water or to the presence of large rocks which are not easily eroded.

In this case, the sinuous ridges contain few boulders resolvable by HiRISE, generally appearing uniform and smooth. They also contain fractures which in places cut across the entire ridge. Both of these observations are consistent with cementation of former channel floors.

Observation Geometry
Acquisition date: 1 January 2007
Local Mars time: 3:51 PM
Degrees latitude (centered): -6.2 °
Degrees longitude (East): 151.4 °
Range to target site: 302.7 km (189.2 miles)
Original image scale range: from 30.3 cm/pixel (with 1 x 1 binning) to 60.6 cm/pixel (with 2 x 2 binning)
Map-projected scale: 25 cm/pixel and north is up
Map-projection: EQUIRECTANGULAR
Emission angle: 29.3 °
Phase angle: 31.2 °
Solar incidence angle: 59 °, with the Sun about 31 ° above the horizon
Solar longitude: 170.1 °, Northern Summer

Background Info:

NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo.

Cataloging Keywords:

Name Value Additional Values
Target Mars
System
Target Type Planet
Mission Mars Reconnaissance Orbiter (MRO)
Instrument Host Mars Reconnaissance Orbiter
Host Type Orbiter
Instrument High Resolution Imaging Science Experiment (HiRISE)
Detector
Extra Keywords Grayscale, Infrared, Map, Water
Acquisition Date
Release Date 2007-02-01
Date in Caption 2007-01-01
Image Credit NASA/JPL/Univ. of Arizona
Source photojournal.jpl.nasa.gov/catalog/PIA09580
Identifier PIA09580